Product Description

Easily Adjust, Install Or Remove Dovetail Sights

The Wheeler Engineering Armour's Handgun Sight Tool makes installing, removing or adjusting dovetail front and rear pistol sights a breeze. A large adjustment wheel on the Armour's Handgun Sight Tool makes micro sight adjusts simple and easy.

The Wheeler Engineering Armour's Handgun Sight Tool uses four independent positioning clamps to secure and support the slide, protecting the slide from bending during adjustments. An additional top clamp provides added security for the slide.

• Large, four post drive knob easily pushes the sight
• Reference marks for precise adjustments
• Works on all semi auto pistols
• Precision machined unit

The sight prong assembly on the Wheeler Engineering Armour's Handgun Sight Tool is reversible to accommodate Glock slides.

Product Description

Main Sight Tool - Now comes with the 30 degree pusher block for Glock and HK sights. A must have for Gunsmiths and Armorers. The Sight Pro uses a unique clamping shoe design, plus 4 slide support pads and a white nylon spacer block to lock the slide in place while adjusting or replacing sights. Two cuts on the lower section of the tool allow you to lock it in a bench vise. Redesigned to make it easier to swap out the pusher blocks. Shoes do not come with Sight Tool.

SPECS:

• SP102 fits Glock except G42 and 43 SP103 fits Springfield XD-S only
• SP104 fits S&W M&P Shield only
• SP105 fits Colt 1911, Sig 1911, Bersa Thunder, Kimber Ultra Carry II, Springfield EMP 9mm, Para-Ordnance Carry 12
• SP106 fits Sprigfield XD, XDM only
• SP107 fits S&W 3rd Generation 9mm
• SP108 fit FN 9mm/.40 cal(FNP, FNS, FNX) Forty-Niine
• SP109 fits Sig Sauer (P220, P225, P226, P228, P229, P239)
• SP110 fits Sig Pro Series
• SP111 fits Beretta 92
• SP112 fits Beretta Cougar/PX4
• SP113 fits HK USP/P2000/P30/P45
• SP114 fir S&W M&P only
• SP115 fits Glock 42 only
• SP116 fits Ruger® SR Series®
• SP117 fits Bersa BP Series
• SP118 fits Colt Mustang .380
• SP119 fits Ruger® LC Series®
• SP120 fits Ruger® P Series™
• SP121 fits CZ-75
• SP122 fits Sig Sauer P238
• SP123 fits Sig Sauer P938
• SP124 fits Browning Hi-Power, FEG Hi-Power, Tokarev
• SP125 fits S&W .380 Bodyguards/Kahr P380
• SP126 fits S&W Sigma
• SP127 fits S&W 3rd Generation .45
• SP128 fits Steyer M40/MPS/M9-A1
• SP129 fits FN .45 Cal(FNP .45, FNS .45, FNX .45)
• SP130 fits Kimber Solo Carry
• SP131 fits Walther P99/PPQ
• SP132 fits Kahr P40/CW40/PM9
• SP133 fits Sig Sauer P320
• SP134 fits Sig Sauer P224
• SP135 fits Kahr P45
• SP136 fits HK VP9
• SP137 fits Sig P290 RS

Product Description

Slide Shoe - Unique clamping shoes are firearm specific. These work with the MGW Sight Pro.

• SP102 fits Glock except G42
• SP103 fits Springfield XD-S
• SP104 fits S&W M&P Shield only
• SP105 fits Colt 1911, Sig 1911, Bersa Thunder, Kimber Ultra Carry II, Springfield EMP 9mm, Para-Ordnance Carry 12
• SP106 fits Sprigfield XD, XDM only
• SP107 fits S&W 3rd Generation 9mm
• SP108 fit FN 9mm/.40 cal(FNP, FNS, FNX) Forty-Nine/FNS-9C/FN509
• SP109 fits Sig Sauer (P220, P225, P226, P228, P229, P239)
• SP110 fits Sig Pro Series
• SP111 fits Beretta 92
• SP112 fits Beretta Cougar/PX4
• SP113 fits HK USP/P2000/P30/P45
• SP114 fits S&W M&P only
• SP115 fits Glock 42 and Glock 43
• SP116 fits Ruger® SR Series®
• SP117 fits Bersa BP Series
• SP118 fits Colt Mustang .380, Kimber Micro Carry .380
• SP119 fits Ruger® LC Series®
• SP120 fits Ruger® P Series™
• SP121 fits CZ-75, Baby Eagle, CZ P09, Sphinx SDP Compact
• SP122 fits Sig Sauer P238
• SP123 fits Sig Sauer P938
• SP124 fits Browning Hi-Power, FEG Hi-Power, Tokarev
• SP125 fits S&W .380 Bodyguards, Kahr P380, Kimber Micro Carry 9
• SP126 fits S&W Sigma
• SP127 fits S&W 3rd Generation .45
• SP128 fits Steyer M40/MPS/M9-A1
• SP129 fits FN .45 Cal(FNP .45, FNS .45, FNX .45)
• SP130 fits Kimber Solo Carry
• SP131 fits Walther P99/PPQ Canik TP9 (Century Arms), Canik Elite
• SP132 fits Kahr P40/CW40/PM9
• SP133 fits Sig Sauer P320, Sig 250
• SP134 fits Sig Sauer P224
• SP135 fits Kahr P45
• SP136 fits HK VP9
• SP137 fits Sig P290 RS
• SP138 fits Grand Power P11 MK12
• SP145 fits Ruger American
• SP146 fits Beretta APX

Product Description

Adjusts, Removes & Installs Sights Without Damage

Safely moves fixed sights right or left in their dovetails without deforming slide or sight. Specifically designed for use with factory and aftermarket Tritium night sights, which are too fragile for the traditional hammer-and-punch sight installation method; works equally well with iron sights. Thumbscrew securely locks the slide so it’s fully supported in the rigid, machined aluminum body. Separate slots in the screw mechanism engage the sight and firmly, yet gently, concentrate screw force to loosen sights from even extremely tight dovetails. Hardened steel handle provides plenty of leverage, while self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads ensure smooth, precise movement. Beretta/Glock fit rear sights only. Glock Flat-Side fits aftermarket rear sights with straight, non-sloped sides for standard- and large-frame Glock pistols. SIG fits rear sights on all SIGs except SIG-PRO. Smith & Wesson M&P fits both and front and rear sights; will not fit Pro models with 5" barrel. Will not fit the Shield model. Smith & Wesson M&P Shield  now fits 9,40, & 45 models. Springfield XD fits both front and rear sights on all XD models except front sight on 5" barrel Tactical model. These do not work on the front sights of Pro/Tactical or sub compact XD/XDM model front sights. Will not work on XD-S slides. 1911 will not work with most Kimber slide/sight combinations. Only works on rear sights. Not for installing or adjusting front sights. Sig fits P220, P225, P226, P228, P239 only. Does not fit Sig Pro series. Does not fit P220 Elite Shadow. Does not work on adjustable sights.

SPECS: Aluminum body, anodized. Steel cross carriage bolt and thumbscrew, black oxide finish. Beretta/Glock - 4¾” (12.1cm) wide, 3” (7.6cm) high, ¾” (19mm) thick. Glock Flat Side - 4¾" (12.1cm) wide, 2½" (6.4cm) high, 1¼" (3.2cm) thick. SIG - 4¾” wide, 5” (12.7cm) high, 1” (2.5cm) thick. Smith & Wesson M&P and Springfield XD - 4¾” (12.1cm) wide, 3-5⁄8" (9.2cm) high, 1-5⁄8" (4.1cm) thick; fits front and rear sights. M&P will not fit Pro models with 5" barrel. 1911 will not work with most Kimber slide/sight combinations.

Product Description

A High-End Precision Sight Tool Without the High-End Price

The MGW Rangemaster Universal Sight Tool delivers most of the functionality of MGW’s flagship Sight Pro Tool in a more compact package that better fits the budget of the average pistol owner. The Sight Pro is rightly regarded by many professional pistolsmiths as one of the finest sight installation tools available and worth every penny of its asking price. But it is a substantial investment for the more casual gun-tinkerer or shooter who’s hands-on about repairs and upgrades.

MGW solves these folks’ financial dilemma with their smaller Rangemaster Universal Sight Tool. The difference? The Rangemaster is limited to a .750" reach from the backside of the slide underlug to the front sight location. (For reference, the original Sight Pro has a full 1.750" reach for use on 1911s and long-slide competition pistols.) Otherwise, the function of the Rangemaster is exactly the same as the Sight Pro.

• Uses the same gun-specific slide shoes (sold separately) as the original Sight Pro. Click Slide Shoe
• Comes with standard pusher block for straight-side sights
• Also accepts other MGW pusher blocks (must be purchased separately)
• Top assembly available separately as MGWSP800-U for quick pusher block changes - simply swap the entire "top half"
• Sturdy, durable aluminum tool body plus stainless steel hardware ensure proper alignment of tool, slide and sight

MGW designed the Rangemaster Universal Sight Tool to accept the same gun-specific slide shoe inserts as the Sight Pro. You buy only the inserts you need for the gun(s) you work on. And if you ever upgrade to the Sight Pro, the shoes you already have are 100% compatible.